Welding Bead Processor 1000W Weld Cleaning Machine Stainless Steel Brush Type Welding Spot Weld Cleaner for Metal Arc

How to UsePlug the power supply into AC110V, connect the gun to the corresponding terminal, plug in the control line, turn on the power switch, then the power indicator (i.e. red light) is on. Stick the processing gun with the processing liquid, press the microswitch, and wipe against the black weld bead. After treatment, wipe with a damp cloth or water for better results(For work such as short-circuit processing gun and workpiece, the machine will automatically disconnect the power supply to stop working, just wait 1-2 seconds can continue to work)SpecificationMaterial: Metal, Plastic and HardwareProcess: PolishingColor: Gray and BlackPlug Type: US StandardInput Voltage: 110VOutput Voltage: 0-34VPower: 1000WFrequency Adjustment Range: 0-34HzBrush Hair Length: 70mm/2.76inchPackage Size: 52 x 19 x 31cm/20.47 x 7.48 x 12.2inchProduct Size: 32 x 15.2 x 26cm/12.6 x 5.98 x 10.24inchGross Weight: 5.2kg/11.46lbNet Weight: 2.6kg/5.73lbPackage Included1 x Welding Bead Processor1 x Advanced Handling Gun1 x Ground Wire Clamp1 x Silicone Positioner4 x Hairbrushes1 x Copper Head1 x English ManualAll Accessories for InstallationNote1. Wear a mask, goggles and gloves to use this machine, to prevent the treatment liquid from spraying into human eyes.2. Please do not switch the machine panel to connect the workpiece and the processing gun line.3. The gun must be wrapped with processing cloth when using the copper head.4. Products must be used with cleaning agents (not included).5. Only need to replace the bristles, stainless steel head can be reused.

• 【High Efficiency】The copper head can greatly commodity cleaning performance. In addition, the IGBT power tube can largely enhance the cleaning agent occupancy rate, and improve the efficiency and service life.
• 【Save Effort】 You need to operate it to scrub back and forth on the weld several times, and the oxidation black spot will be cleaned immediately. It flexibly removes small gaps and hard-to-touch places, and avoids manual polishing.
• 【Low Cost】This welding bead processor takes less time, is faster and has a better cleaning effect than traditional grinding and pickling treatment. Meanwhile, this weld cleaning machine will not pollute the environment after use, and there is no need to treat the cleaned sewage.
• 【Intelligent Adjustment】This welding bead processor can compensate for unstable voltage through intelligent and frequency adjustment(0-34Hz), automatically identify high and low voltage, and instantly increase the voltage to clean various degrees of yellow spots, black spots and weld spots.
• 【Short-circuit Protection】This welding bead processor has an intelligent short-circuit protection function, even if you make a mistake in the operation and trigger a short circuit, you can effectively protect the motherboard.